有用戶反映注塑模具使用時間長了之后，模具有些地方型腔會有點磨損，再加上在日常使用中沒有對模具及時的上油，所以頂桿一下卡死了。不知道應該如何處理，其實，當模具發生問題的時候，千萬不要慌張。只要嚴格按照正確處理步驟進行應對，就可以避免不必要的損失，接下來就為大家簡單介紹一下處理注塑模具問題的正確方法。
Some users reported that after the injection mold has been used for a long time, some parts of the mold cavity will be a little worn. In addition, in daily use, the mold is not oiled in time, so the ejector is stuck. Do not know how to deal with, in fact, when the mold problems, do not panic. As long as we strictly follow the correct processing steps, we can avoid unnecessary losses. Next, we will briefly introduce the correct method to deal with the problem of injection mold.
注塑模具是注塑成型過程中使用的使熔融態塑膠定型成特定尺寸、形狀的模具。區別于吹塑模具、擠出模具等。
Injection mold is used in the process of injection molding to shape the molten plastic into a specific size and shape. Different from blow mold, extrusion mold, etc.
注塑模具是注塑成型過程中使用的使熔融態塑膠定型成特定尺寸、形狀的模具。區別于吹塑模具、擠出模具等。隨著塑料工業的飛速發展和通用與工程塑料在強度等方面的不斷提高，塑料制品的應用范圍也在不斷擴大，塑料產品的用量也正在上升。
濟南注塑模具
Injection mold is used in the process of injection molding to shape the molten plastic into a specific size and shape. Different from blow mold, extrusion mold, etc. With the rapid development of the plastic industry and the continuous improvement of the strength of general and engineering plastics, the application scope of plastic products is also expanding, and the consumption of plastic products is also rising.
我國塑料模具在高技術驅動和支柱產業應用需求的推動下，形成了一個巨大的產業鏈條，從上游的原輔材料工業和加工、檢測設備到下游的機械、汽車、摩托車、家電、電子通信、建筑建材等幾大應用產業，塑料模具發展一片生機。發現注塑模具問題后的處理步驟介紹如下：
Driven by high technology and the application demand of pillar industry, China's plastic mold has formed a huge industrial chain. From the upstream raw and auxiliary materials industry and processing and testing equipment to the downstream machinery, automobile, motorcycle, home appliances, electronic communication, building materials and other major application industries, the development of plastic mold is full of vitality. The processing steps after the injection mold problems are found are as follows:
首先，當我們發現注塑模具生產時候有異常。應該先暫停生產，拍照并做好相關記錄。
First of all, when we found that there was an exception in the production of injection mold. Production should be suspended, photos taken and relevant records made.
分析問題。由模具老師對模具問題行分析，查看引起問題的具體原因。例如：調試不當引起，機械問題引起，操作不當引起等等。
Analyze the problem. The mold teacher will analyze the mold problems and check the specific causes of the problems. For example: improper debugging, mechanical problems, improper operation and so on.
聯系注塑模具生產廠家，或自己廠里的維修部門，獲取解決方案和維修支持。
Contact the injection mold manufacturer or the maintenance department of your own factory for solutions and maintenance support.
